I am excited to share my latest project with all of you; a window table. Once you have the materials, this project is pretty easy and low cost! It’s a win-win when it comes to creating a cool piece that’s custom to your needs, whether it be a coffee table, plant stand, or a side table the options are endless.
What You’ll Need;
- Window (of your choice) – I used an original window from our basement, since they were pulled out when we had glass block put in. Total cost; $0
- Don’t have any old windows laying around? Check garbage day, it’s amazing what people will put on the curb!
- 4-Legs; length and style of your choosing. I used: Waddell Ash End Table Leg from Lowes. Total cost; $16
- NOTE: I bought legs with pre-installed hanger bolts that allowed for a clean smooth finish without needing extra hardware to attach the legs
- Wood Glue
- Paint – color of your choice & paint brush
- Drill and drill bit to predrill holes for legs
- Blade to scrape off excess paint on windows
- Timing; finished within a weekend
From there you can prep your window by cleaning it up and sanding if you’d like. I opted to keep the hinges and some of the other rustic elements since I was working with a 100-year old window.
Next, flip over and mark out where you’d like to place your legs – as you can see with the window I was working with the spacing and exterior width was inconsistent and not much to work with so I eyed about an inch from the edges. Once I had those marked, we pre-drilled a hole, although we didn’t go deep enough a few times so we had to go back over the holes.
Before screwing the legs in we added wood glue in the hole and around the bolt on the leg. Make sure your legs get all the way in and are secure, some of ours were wobbly, so we had to re-drill new holes and start over. But once they were in and secure you definitely knew it. The wood glue required about 12-hours to dry, so day one was finished.
After the wood glue was dried, I flipped the table over and began to paint! I opted to use a primer over the preexisting brown, and also did the legs in the same color. I had to do 3-coats before this beauty was looking clean.
I let B do the fun stuff and scrape the paint I’d gotten on the window. This really cleaned up the piece to give it that finished look. From there it was just giving it a good clean with some Windex and setting it up in place – we added this gem as an accent in our sun room. The light and airy of the white and windows ties into the space perfectly.
Using most of what we already had, the main expense was buying the legs for $16 – you can’t even get a coffee table for that! I love the way it turned out, it still has a vintage and rustic flare to it. Not to mention it has multiple purposes and I am sure it will change overtime for us!
Happy DIYing!
the bee life 