Our first project of the year is complete! After being sick most of January, we finally had enough energy to conquer this project which was a quick 3-hour project with a huge impact. After seeing Peony and Honey’s stair runner makeover, the wheels were spinning, but nothing started to move. It wasn’t until we put our removable stair treads back on our bare wooden steps that I was not loving the look anymore! So I did a little extra research, found some runner options, and pitched the idea to B.
We had a two-tiered staircase with a larger landing with bay windows going up to our second floor. So there was some debate about how to treat the landing – which may still be coming, but for now is going to be bare wood floors. Regardless, we needed to get two runners for our project to account for the two runs. We figured out our length needed by measuring the stair height and tread and then multiplying it by the number of steps to get our total length in feet. Oh! And this is definitely a two-person job if anything to help keep the carpet tight while the other staples in place.
I was honestly hoping this project would be a little more affordable, but we ended up picking out runners that were more expensive, which drove the majority of the budget. The runners are definitely more plush, which was good for hiding the staples. This one couple, which was part of my research did theirs for $100 – so it’s definitely possible to do this on the cheaper end with some more affordable rugs and different nailing tools. This DIY project was around $360 for us.
Before we got started, I vacuumed and washed the steps with Murphy’s Oil Soap to make sure they were super clean (& dry) before we put the runners on. After all of our construction, they definitely needed it! The smaller of the two stairs took us a little over an hour to get the runner on, and then larger steps, closer to 2-hours because it was a little bigger and these are the main stairs you see from the first floor.
Step-by-Step: 1. First you start at the top of your stair, with the flat end of the rug – make sure it’s centered within your stair with equal length on either side before stapling into place. Stapling along the sides of the rug and top is key to getting it secure! 2. Make sure it’s tight, as you work into both back of your stair to fold over top on the stair topper. 3. Once you get to the first ledge, it’s important to fold over and staple along the length to keep it in place and tight! Ours was tricky because it was very plush, so finding the sweet spot in between the plush was crucial to getting a tight and secure staple in. 4. Basically rinse and repeat down your stairs! You definitely get the hang of it after the first couple of stairs. 5. Once you get to the bottom, get an exacto knife to cut your leftover rug. We put a piece of wood underneath as to not damage our flooring and get a good straight cut across. Using heat along the cut edge will help from fraying – I suggest a heat gun. (We ended up cutting a little longer, and folding under to avoid the fraying). 6. Afterwards, I went back and replaced any staples that were super noticeable, or hid them by adjusting the rug with pliers ever so gently. I also went and reinforced any sides and areas that moved more than I liked.
B and I love how this turned out – and it is definitely an upgrade! As I mentioned, we may add a runner to the landing that matches or update the landing rug on the second floor to match this as well for a little more cohesion. I also feel like we need some new curtains for the bay windows… *immediately opens the Target app*.
With these cooler temps, it has definitely been feeling like fall, which has been more than welcomed at our house now that it’s October! And one of my favorite rooms to transition through the seasons besides our front door, is our dining room — this year I wanted to keep it simple, but of course create a statement! And I love the options this centerpiece has for this year and years to come.
This project cost a little more than I would’ve liked, but I was relying on the interwebs and getting things shipped to my door – so I was OK to pay a little more. I would’ve been curious to see what could’ve been found at the Dollar Tree or in an actual craft store. But I stuck to shopping on Amazon. I also got two different pumpkin varieties, because I wasn’t sure about the quality and tried to save a few bucks — I also ordered about 36-pumpkins, unsure of how many I would actually need and I used about 30, so it worked out perfectly!
To create this centerpiece, it’s super easy! I broke/cut the skewers in various lengths to give depth and fill in and stuck them into the foam pumpkins. I filled them in mixing the larger pumpkins and smaller pumpkins, with a majority of the larger pumpkins alternated across the top. The best part if you mess up, or need to move a pumpkin placement it’s super easy to create a new hole/space with your skewer! Once I had all my pumpkins and the top filled, I took some left over greenery from a previous project and filled in larger gaps where you could see the green floral foam.
And wah-la! It’s a mini pumpkin statement and easy to move since it’s all contained. As you can see, the stem colors were different — originally I had the idea to paint them gold, but after getting them in place with the filler, the colors don’t bother me as much. I was planning to paint the white pumpkins in some dull, fall colors, but I ended up liking the all white look with the subtle pops of color with the table runner and faux florals. What do you think?
This weekend was pretty great, and Saturday was pretty perfect. The sun was shining all day long and the temp was ideal to catch some rays. Meaning we were outside pretty much the entire day. B touched up the paint on the front porch, we got our patio furniture out, got a run in and I even got this fun DIY project done. This painted DIY doormat is an affordable and fun way to add a custom finishing touch to your front door decor.
– Once you have your supplies secure – which pro-tip you can still order from Michael’s and they’ll bring it out to your car and throw it in the trunk, no human contact.
– Your rugs will most likely come rolled, so make sure you get them flattened out before you craft, I placed some heavy photo albums on the ends for a couple days.
Pro-Tip: If you’re painting the whole back drop of your rug, make sure to grab two of your background color – I barely had enough pink! Also grab 3-4 bottles of the Polyurethane. Also the assorted foam brush packet had the perfect variety of sizes for the detail of my design, not the best quality but got the job done.
– Now for the fun! Figure out your design. I found my inspiration from Gradin Road and thought it was totally perfect and a fun pop of spring to add to our front porch! If you’re opting for a phrase with letters you’ll want to get a stencil cut out – a Cricket would be perfect to help customize (I don’t have one of those yet!)
– I hand drew and cut out the body of my bee to help get me started and then free handed the rest of my bee with paint and brushes. But feel free to create stencils and paint as you feel comfortable. I did a lot of dabbing with my foam brushes to make sure the paint covered the mat properly.
– Once you have your design painted, go over spots with painted to make sure it’s covered and pops as much as you’d like. From there I picked my background color and filled in the rest of the doormat it was a tough decision between pink or green. As I said above, make sure to grab at least two tubes of your background paint, I barely had enough with one of my pink and just barely enough to cover my 30″ x 18″ rug.
– Once you’re happy with your paint coverage and design, it’s time for the final step! Paint your polyurethane over top the entire piece to help seal in the paint. I used two full tubes, but could’ve definitely used at least one or two more – it dries clear so it doesn’t impact your design at all!
There is still time to see how this holds up in the weather — luckily it is on a covered front porch, but definitely gets full sun in the morning. I love how it turned out and layered with a colorful underlay rug to make sure it really pops on the front porch! I still have another plain rug to paint and create a fun design — I can’t decide if I’ll safe it for the holidays or a funny saying, time will tell!
1. I order my linen table runner from Amazon, there was a brief though to try and make my own with buying fabric – but I quickly saw that being a disaster. Two-day shipping and $14.99 on Amazon, sounded way better! I compromised on the size (14″ x 72″), as I like a wider table runner since we have a larger dining room table, but found a off-white linen that looked to be perfect.
2. Paint color was my toughest decision – I initially planned to do black, but thought red could be fun and then ultimately decided on a lighter pink as that worked better with dining home decor and I love how it turned out! Now to the fun stuff…
3. Before I got painted, I did have to iron my table runner to smooth out some of the fold marks! I didn’t get it as smooth as I would’ve liked, but it was much better than before – this was definitely needed before painting.
4. Get ready to paint! I put paper bags down in order to paint, and painted on my dining room table — which was a good feel for the space while I painted and scaling my X’s and O’s. Starting in the bottom corner I kept it simple and fit four across and repeated the pattern by alternating which letter I started with and worked my way towards the center. Pro-tip: I eyed my spacing and letter size, but you could use a ruler to keep spacing even between lines and/or letter height!
5. Keep going until you finish up the length of your runner! Keep in mind as you’re painting if you mess up, or have brush strokes showing, it’s OK — it’s suppose to look hand drawn and painted which gives it a unique look. Besides, from a distance you can’t really see any of the imperfections.
I let this dry overnight before styling this up! I had another pink table runner that was a little wider than mine, so I was able to layer underneath and the pinks complimented each other perfectly! I then added a few jars with conversation sweet heart candy, some fun colorful garland, this table was just needing a few finishing touches for a Galentine’s brunch!
Besides just completely loving how this came out (slightly obsessed!) — the price can’t be beat for a custom piece that fits EXACTLY what you were wanting. $16 is about the going rate, if not more for you’re every day or holiday themed table runner, so I imagine I’ll be doing this in the future for more holidays or special occasions! Plus it only took me about 45-minutes to iron and paint.
Looking for an affordable fall craft to kickoff your October? You’re in luck, I have this super easy and affordable craft using Target’s $4.99 paper mache craft pumpkins and craft paint and a gold craft pen you can create colorful and custom pumpkins for your fall decor! For around $10 a pumpkin, you can craft and create a fun piece to add to your interior fall decor collection.
Pro-tip: Stock up on all the colors for your acrylic craft paint, you’ll always use them and a nice selection is always great to have on hand for spur of the moment crafts. Same goes for foam brushes, just grab a handful or two!
1. Determine your colors! I opted for a paler orange and a lighter green for my pumpkins. I mixed my colors with white to lighten them up a bit.
2. Paint your pumpkins completely using the foam brush and your paint color – leave stem unpainted, unless you want a more simplistic look.
3. Allow to dry before adding a second coat – you can determine the number of coats of paint based on how much the paper mache shows through.
4. Once your pumpkin base is painted, now it’s time to paint your pumpkin stem. I opted for gold, I used metallic craft paint for this. You could also cover you stem with gold glitter!
5. Add detail with paint or gold craft pen – I kept this simple and added some flair around the stem. You could also do gold polka dots, stripes or writing a fun message or sentiment like “hello fall” or “I’m here for the boos.”
6. Style and decorate with other pumpkins around your house!
I am still getting all my fall decor out, so I am sure these guys will be moved around a bit more — but this was an easy and perfect DIY to get all those fall decor juices flowing! How would you paint your paper mache pumpkins? Would you keep them simple like mine, or punch them up with patterns or words?
I am excited to share my latest project with all of you; a window table. Once you have the materials, this project is pretty easy and low cost! It’s a win-win when it comes to creating a cool piece that’s custom to your needs, whether it be a coffee table, plant stand, or a side table the options are endless.
What You’ll Need;
Window (of your choice) – I used an original window from our basement, since they were pulled out when we had glass block put in. Total cost; $0
Don’t have any old windows laying around? Check garbage day, it’s amazing what people will put on the curb!
NOTE: I bought legs with pre-installed hanger bolts that allowed for a clean smooth finish without needing extra hardware to attach the legs
Paint – color of your choice & paint brush
Drill and drill bit to predrill holes for legs
Blade to scrape off excess paint on windows
Timing; finished within a weekend
From there you can prep your window by cleaning it up and sanding if you’d like. I opted to keep the hinges and some of the other rustic elements since I was working with a 100-year old window.
Next, flip over and mark out where you’d like to place your legs – as you can see with the window I was working with the spacing and exterior width was inconsistent and not much to work with so I eyed about an inch from the edges. Once I had those marked, we pre-drilled a hole, although we didn’t go deep enough a few times so we had to go back over the holes.
Before screwing the legs in we added wood glue in the hole and around the bolt on the leg. Make sure your legs get all the way in and are secure, some of ours were wobbly, so we had to re-drill new holes and start over. But once they were in and secure you definitely knew it. The wood glue required about 12-hours to dry, so day one was finished.
After the wood glue was dried, I flipped the table over and began to paint! I opted to use a primer over the preexisting brown, and also did the legs in the same color. I had to do 3-coats before this beauty was looking clean.
I let B do the fun stuff and scrape the paint I’d gotten on the window. This really cleaned up the piece to give it that finished look. From there it was just giving it a good clean with some Windex and setting it up in place – we added this gem as an accent in our sun room. The light and airy of the white and windows ties into the space perfectly.Using most of what we already had, the main expense was buying the legs for $16 – you can’t even get a coffee table for that! I love the way it turned out, it still has a vintage and rustic flare to it. Not to mention it has multiple purposes and I am sure it will change overtime for us!