DIY – Wooden Love Letter Valentine’s

I love getting crafty and making my own Valentine’s especially when it comes to my hubby! A few years ago, I shared my go-to homemade paper Valentine, made from scrapbook paper, pictures, stickers and ribbon — but this year I wanted to mix it up and do something still crafty but different.
DIY_Valentines(3)I found these really cute wooden pieces at Michael’s for this fun DIY Valentine that is so easy and affordable to make by stacking them to make mini love letter envelopes with big hearts on them! Super easy, super cute and then you can personalize them for all your Valentines. The best part is these wooden Valentine’s can double as adorable place-settings for your Galentine’s brunch!

Craft Supplies:
– (1) Wooden Hearts – 21pcs
– (2) Rectangular Wooden Signs – 6pcs
– All purpose craft paint Valentine colors of your choice ($0.79 each)
– Hot Glue
– Smaller paint brush – I have this 7ct Paint Brush set from Target

Project Cost: $12
DIY_Valentines(1)

Step 1: First things first, is to paint all of your wooden pieces — have fun with this and mix and match but pick colors that’ll compliment each other. I did a lot of white bases with pink or red hearts.  I also did a few pink and red bases with white hearts which was a fun pop!

Step 2: You’ll probably need to do a few coats, especially the white on the wood — it soaks up the color, make sure to paint both sides of the bases and let all your pieces dry with plenty of time!

Step 3: Once everything is painted and dried, you can hot glue your hearts onto your bases. I kept my centered, but you could offset to write if you wanted too!

Step 4: Personalize as you’d like with fun phrases, names, or cute messages on the heart and write a longer message on the back of the bases for all your favorites. If you’re using these as place settings for a Galentine’s brunch or dinner you can stick with names or write fun little notes for each of your bae’s.
DIY_Valentines(2)
These little love letter Valentine’s are to cute, hand held and also dual purpose (which I also love!) So get your crafting pants on and head over to snag these supplies so you can create your own custom, cute and clever Valentine’s that will be the perfect keepsake for friends, family or all your gal pals.

bee (1)

 

Gearing up for Valentine’s Day? Check out these easy painted Valentine themed table runner or this festive floral door decor!

DIY – Painted Valentine Table Runner

Ohhh, you guys!! This was a fun, easy and affordable craft and I just love how it turned out! This custom Valentine-inspired painted table runner is a spin on an everyday piece and not one that I really ever thought about making, at least one that didn’t involve buying fabric, sewing or investing a ton of time on. Read more to see my supply list, project cost and step-by-step for painting and creating your own X’s and O’s table runner, just in time for a Galentine’s brunch!
DIYTableRunner(3)Craft Supplies:
Off-white plain linen table runner from Amazon ($14.99)
All purpose craft paint: Pink / Rose from Michael’s ($0.79 each)
– Smaller paint brush – I have this 7ct Paint Brush set from Target

Project Cost: $17
(not including paint brushes)

Step-by-Step:
1. I order my linen table runner from Amazon, there was a brief though to try and make my own with buying fabric – but I quickly saw that being a disaster. Two-day shipping and $14.99 on Amazon, sounded way better! I compromised on the size (14″ x 72″), as I like a wider table runner since we have a larger dining room table, but found a off-white linen that looked to be perfect.
DIYTableRunner(1)
2. Paint color was my toughest decision – I initially planned to do black, but thought red could be fun and then ultimately decided on a lighter pink as that worked better with dining home decor and I love how it turned out! Now to the fun stuff…
3. Before I got painted, I did have to iron my table runner to smooth out some of the fold marks! I didn’t get it as smooth as I would’ve liked, but it was much better than before – this was definitely needed before painting.
4. Get ready to paint! I put paper bags down in order to paint, and painted on my dining room table — which was a good feel for the space while I painted and scaling my X’s and O’s. Starting in the bottom corner I kept it simple and fit four across and repeated the pattern by alternating which letter I started with and worked my way towards the center.
Pro-tip: I eyed my spacing and letter size, but you could use a ruler to keep spacing even between lines and/or letter height!
DIYTableRunner(2)
5. Keep going until you finish up the length of your runner! Keep in mind as you’re painting if you mess up, or have brush strokes showing, it’s OK — it’s suppose to look hand drawn and painted which gives it a unique look. Besides, from a distance you can’t really see any of the imperfections.

I let this dry overnight before styling this up! I had another pink table runner that was a little wider than mine, so I was able to layer underneath and the pinks complimented each other perfectly! I then added a few jars with conversation sweet heart candy, some fun colorful garland, this table was just needing a few finishing touches for a Galentine’s brunch!

Besides just completely loving how this came out (slightly obsessed!) — the price can’t be beat for a custom piece that fits EXACTLY what you were wanting.  $16 is about the going rate, if not more for you’re every day or holiday themed table runner, so I imagine I’ll be doing this in the future for more holidays or special occasions! Plus it only took me about 45-minutes to iron and paint.

What do you think!?

bee (1)

Valentine Floral Letter Door Decor

With the last few days of January, I’m starting to get the house ready for the holiday and love! And our front door is always my starting point. Over the summer I finally made a floral letter craft that I’ve had on my list for year’s (and was a gift) and was inspired to create my own floral letter’s only for some new Valentine door decor. I was pumped when I snagged some seriously discounted pink and white florals over the holidays along with an oversized wooden X and O, this was just what I needed for some pretty and festive Valentine decor!
Valentines_Floral_Final(4)Ok! Here is what you’ll need to get started, in addition to a step-by-step guide to filling in your letters with florals and then securing for a stunning statement piece for your front door!

What You’ll Need:
13″ Wooden Letters from Michaels for $5.49 each
– Florals of your choice (7-9 stems)
– Hot glue
– Pink ribbon or color of your choice, make sure it’s at least 3-feet long if you’re working with 13″ letters

Pro-tip: Keep an eye out for discounted seasonal florals in the off season to stock up for future projects or gift ideas!

Step-by-Step:
1. Floral buying tip — always buy a few more bunches than you think! I used about 4-stems of the pink poppy flowers and 3 stems of the white flowers, and I was running short! My initial plan was to do all pink, but did not have enough… which leads me to an important step #2.
2. Once you’ve dead-headed all your faux flowers (removing flower from the stem) — it’s crucial to map out your placement before any gluing! This can help you determine if you need more fillers or need to switch up the design.
3. Now that you have your florals mapped out on your letters, it’s time to start gluing your flowers on! It’s important to be generous with hot glue on the base stem of the flower in addition to the petals if needed to help with coverage. Cut off any additional stem that might make your flowers stick out more than you want! Repeat, until letters are filled in.
4. Allow for plenty of hot glue dry time for your X and O flower filled letters before flipping over to add the handing ribbon. This ribbon will connect the two letters in order for them to hang. Make sure the length of the ribbon is long enough to span the X and O with some extra, to be able to tie a loop/knot for hanging — stretch out over the back of your letters before gluing to make sure you have length. Again, be very generous with your hot glue with this since your floral letters will be hanging from the ribbon. Allow this proper time to dry before trying to hang. Valentines_Floral_Final(1)
Once you have your letters filled in and the ribbon attached, tie a loop to hang on your front door — it’s time to hang! This would even make fun wall decor that could hang inside your dining room or in place of a photo.  I added extra ribbon at the top to have a bow for a nice finishing touch on the door – and love how the pink and white pops on our blue door! Our front door is now ready for the Valentine holiday and spreading love to anyone who passes by.

bee (1)

 

Looking for more Floral Letter Inspiration? Check out my $25 Floral Letter for Baby Shower decor.

DIY – Easy Festive Letter Ornaments

Eeek, it’s Christmas Eve! And normally I have a bit more of my sh*t together, but this year I was a bit behind in the craft ornament department. Ornaments are always my go to Christmas gift not only are they great year after year, they are sentimental and the perfect keepsake for moments or milestones in time.  Beyond a sentimental ornament, I always like to get letter ornaments, especially as a fun present topper.
DIY-LetterOrnament-beelifeblog(4)
This year I went the custom letter route with a fun holiday twist on something so simple and martially already made.  I found wooden letter ornaments in the dollar bins at Target and thought it would be fun to dress them up with festive jingle bells and colored pom poms. This project was about $15 in materials and took maybe a half hour of my time to make everything — so easy, so cute and super cost friendly!

What You’ll Need:
– Letter Ornaments
16mm Jingle Bells – 2 packs
Colorful Craft Pom Poms from Target
White and Red Craft Pom Poms from Michaels
– Hot glue gun and glue sticks
DIY-LetterOrnament-beelifeblog(1)Step-by-Step:
1. After you have your supplies it’s really quite easy and fun! The goal is to cover your letter with your jingle bells or pom poms — I laid out the design and determined quantity before I started gluing to make sure I had enough to cover each ornament, while having a mini road map made.

2. A few of the letter ornaments I decided to color block with the jingle bells with all silver or all gold, I even had a little fun alternating red, blue and green on a third one! The fun part is they even jingle, it;s the perfect little bling and ring for the tree.

3. For the pom poms, I had a variety of sizes, I liked both size options and how it looked mixing and matching the two different sizes to fill in the letter. I went with reds, whites and greens and then some multi-color pom pom ornament for us.

4. Let dry and gift a fun custom ornament to your friends or family!
DIY-LetterOrnament-beelifeblog(3)
I’m definitely trying to cram it all in today — including a workout to start the day, some volunteer dog walking, squeezing in a few more of these ornaments and wrapping all of my presents before church! I am very much looking forward to relaxing a littler later and the next few days. Merry Christmas, Eve!

bee (1)

DIY – Wooden Couch Sleeve

Ever have those pins that you saved at the beginning of Pinterest-time and have always wanted to make? I’ve wanted to make a wooden couch sleeve for a long time — it seems like an easy, practical solution without having side tables everywhere.  But our main living room furniture has rounded arms and these wooden couch sleeves definitely seem better suited for a squared off arm.
DIY_Sleeve_beelifeblog(6)
I knew I would be able to make this fairly inexpensively as long as we had some scrap wood laying around — and luckily we did! I was able to utilize tools that we already had, so this project cost me $0.  And with our basement makeover, our furniture downstairs had squared off arms with a lower side table that only serves part of the seating, I thought this would be a perfect addition to our ‘finished-unfinished’ space especially with the natural rustic wood piece.

What You’ll Need:
– Scrap wood
– Table saw
– Sandpaper
– Satin/Gloss Clear Coat Spray Paint
– Nail gun
DIY_Sleeve_beelifeblog(1)
Step-by-Step:
1. Determine the length of your main top piece based on your furniture. I decided on 13″ long and kept the original width of the board. You’ll want your sides to be the same length, width of sides can be all equal or shorter.

2. Using a tape measure and straight edge, draw a straight line for your top piece, then cut with table saw. For the sides because my scrap wood was older, I cut the same length and it pretty much split down the middle to make two smaller pieces.  I liked the more unfinished, raw edges as I wanted to keep the integrity of the older wood.

3. I then sanded the pieces on both sides and all of the edges.  Again, I liked the color of the wood – I just needed to work out a few rough spots and clean it up. After sanding, be sure to wipe down the pieces with a cloth to get rid of extra dust.
DIY_Sleeve_beelifeblog(2)
4. I then did a top coat with Satin finished spray paint — that I happened to have at the house already.  Spray top coats are a little trickier to see full coverage until dry – so for that reason you may need to do a few coats depending on the finish and coverage you want (above picture before spray, bottom after spray).  I did two coats on the main top and sides, and one on the underneath part.

5. Once I was content with the top coat it was putting everything into place with the nail gun.  I opted NOT to use wood glue for two reasons (1) being lazy (2) we don’t have clamps, so we would’ve nailed in place shortly after gluing like we did for our floating shelf. This was a two person job to ensure the nails went in securely.  We put the sides in a bit so they would be snug against the couch, since I opted to keep the top the original width of the wood, avoiding too many cuts.

Pro-tip: I made sure all my cut edges were in the back of my piece, so the original rough edges would be facing out. I also determined my top early on when measuring and cutting pieces.
DIY_Sleeve_beelifeblog(3)
This is the perfect addition to the space, and it’s sturdy for an afternoon cup of coffee, the remote or a glass of beer watching the game! Although we have a super cute trunk side table in this space, it’s much lower than the couch and chair so it isn’t exactly convenient for ongoing sipping. This couch sleeve is also portable, so it can move around depending on which spot you’re in or who needs it. I love how it turned out and it’s imperfections!  Plus — this could also be a sweet Christmas gift for just about anyone.

bee (1)

$12 Custom Bathroom Drawer Storage from the Dollar Store

With our recent bathroom makeover and having the addition of a second bathroom – a few floors below our main bathroom – I wanted to make sure it’s stocked just like our upstairs bathroom with all the essentials. The vanity is extra wide but is the only true storage for this space so I have to be smart with it!
StorageUpdate(1)beelifeblog
One of the top drawers has an opening for the sink pipes so it’s an odd U-shaped drawer. But since it’s the first main drawer under the sink, this seemed like a good spot to stock up with all the bathroom must-haves. In order to accommodate this unique space, I created custom drawer storage with a high-end feel using 3-inch square glass votive holders… from the dollar store! I use these for various things throughout the year, entertaining with snacks – votives – seasonal decor, so I gave these a try in the space and they ended up working out perfectly.
StorageUpdate(3)beelifeblog

After the glasses were in place, I tested opening and closing the drawer and noticed they were a little clanky.  To help with this, I added felt furniture pads in between a few of the glasses to avoid the clinking noises. On top of having high-end custom drawer storage with these glass holders, they can double for vanity decor holding goodies like cotton rounds, q-tips or cotton balls, especially if you’re having company coming over! Then you can pop them back into the drawer and easy peasy – storage is still on point. So for $1 per glass, you can truly make a statement while staying organized!

Shop the Pieces:
– (12) 3″ Glass Votives from Dollar Store
– Optional: Felt Furniture Pads

And then stock up with essentials like band aids, cotton products, tampons, floss, nail care and toothpaste!
StorageUpdate(2)beelifeblogI’m not used to having so much space to fill up, especially in my bathroom! But I love how this came together and is nicely organized while also having options for guests while the essentials for us — another drawer is completely full of toilet paper, but I still have a few more drawers that have extra space for more towels and other bathroom essentials!

bee (1)

DIY – Painted Paper Mache Pumpkins

Looking for an affordable fall craft to kickoff your October?  You’re in luck, I have this super easy and affordable craft using Target’s $4.99 paper mache craft pumpkins and craft paint and a gold craft pen you can create colorful and custom pumpkins for your fall decor! For around $10 a pumpkin, you can craft and create a fun piece to add to your interior fall decor collection.
DIYPumpkins(4)-thebeelife
What You’ll Need:
Paper Mache Pumpkins – $4.99 each
Craft Paint Colors of Your Choice – $0.79 each
Foam Brush – $0.49 each
– Optional: Gold Craft Pen – $3.79

Pro-tip: Stock up on all the colors for your acrylic craft paint, you’ll always use them and a nice selection is always great to have on hand for spur of the moment crafts. Same goes for foam brushes, just grab a handful or two!

Step-by-Step:
1. Determine your colors! I opted for a paler orange and a lighter green for my pumpkins.  I mixed my colors with white to lighten them up a bit.
2. Paint your pumpkins completely using the foam brush and your paint color – leave stem unpainted, unless you want a more simplistic look.
3. Allow to dry before adding a second coat – you can determine the number of coats of paint based on how much the paper mache shows through.
4. Once your pumpkin base is painted, now it’s time to paint your pumpkin stem.  I opted for gold, I used metallic craft paint for this. You could also cover you stem with gold glitter!
5. Add detail with paint or gold craft pen – I kept this simple and added some flair around the stem. You could also do gold polka dots, stripes or writing a fun message or sentiment like “hello fall” or “I’m here for the boos.”
6. Style and decorate with other pumpkins around your house!
DIYPumpkins(3)-thebeelife
I am still getting all my fall decor out, so I am sure these guys will be moved around a bit more — but this was an easy and perfect DIY to get all those fall decor juices flowing! How would you paint your paper mache pumpkins? Would you keep them simple like mine, or punch them up with patterns or words?

Happy Crafting!

bee (1)

 

DIY – $25 Floral Letter

This is a DIY I have had my eyes on for a long time and I finally got around to grabbing the supplies and giving it a try!  A floral letter can be perfect for hanging on your door in the spring with you’re families last name initial, hanging in a living space, bedroom or for nursery decor.  My initial inspiration for baby shower decor, with it doubling as nursery decor after the shower! The theme of the baby shower was Woodland glam, so I went with a bit more muted colors for my floral color palette.
9329A723-BE7F-4D51-B682-6604E5864AEB
What You’ll Need:
– Hot Glue Gun & Glue // Mod Podge would probably work well too
– Letter of Your Choice – I grabbed this 13″ B from Michael’s for $4.99
– A mix of florals – grab smaller filler flowers & larger florals
– Shop my Florals: Hydrangea & Rose Bundle ($6) | Green Wild Mum Stem ($5) | Toast Strawflower Bush ($6) 
– Ribbon for hanging or clip
Floral Letter - beelifeblog (2)
Step-by-Step:
1. When shopping for your florals, grab a good mix of size, color accents and potential filler pieces, you’ll definitely want more than not enough! I bought 5-different stems/bunches.
2. Start by de-heading your faux flowers from their stems and start playing around with placement on your letter.
3. I put larger/heavier flowers in the bottom corner to help anchor the piece and also did this in the top of the B to help add some equal weight.
Floral Letter - beelifeblog (3)
4. From there I filled in with smaller flowers and use my smallest flowers to really fill in smaller spots and make it feel lush and full – while still holding to the shape of the B.
5. As you work in sections and get areas figured out, cut underneath of flower stems as low to the flower as you can in order to keep it somewhat flush to the letter. Then, begin gluing your determined sections into place – I was very generous with the hot glue around the stem area, and even onto the underneath of the leaves to help secure in place.
6. Continue adding florals until the top part of your letter is completely filled! Let dry a bit to ensure florals are completely secure. Then you’re ready for decorating/hanging!

Don’t forget to have fun, get creative and use other pieces of your flowers like some of the leaves to help fill in the space – I was nervous I wouldn’t have enough flowers to fill the space and this helped even everything out.

Since I was making this as a gift, I’ll definitely be making one for us next to keep and use on the front door.  I can see this being a new go-to gift for a people this upcoming holiday season or would be an awesome housewarming present! A few other ideas for your floral letters would be spelling out smaller words like MOM for Mother’s Day or just using the same flower and color to really create a bold statement – this could also be done with numbers for a milestone birthday.  I also love how this completed a centerpiece statement at shower and can’t wait to see if in the finished nursery!

bee (1)

DIY – French Barn Door

Our bathroom makeover was a complete revamp, and figuring out what we were going to do with the door was all over the place.  Since we had limited room we were initially planning to do a pocket door. But then we switched to something more modern with frosted windows – but the doors I found and liked were well over $300, way more than we wanted to spend, so we went back to the drawing board and tried to figure out a door we might be able to make.

We got the idea to check out our local Habitat for Humanity Restore to see if they had any doors that might fit the bill, or even something we could turn into our own.  We really wanted something that had windows in it, like a french door, but wanted to frost the windows since it’s for a bathroom… we just needed to find an affordable french door.  And we did! It was a little skinner than we needed, but we were confident we could extend it and make it our own and DIY-ing our own barn door using black pipe.
DIY door - thebeelife
Cost Breakdown:
– French Door – $55
– Frosted Spray Paint – $5
– White Paint – $18
– (2) 2x4x8′ – $8
– Wood Glue – $15
– (2) Wheels – $7
– (2) Hooks – $6
– (1) Bar w/ base and corners – $30
Barn Door Handle – $21
Total Cost: $165

What We Did:

  1. First we sanded down the door and removed some of the extra pieces/frame that was on the door.
  2. Through trial and error we finally figured out the proper piece of wood to use to extend the width of the door which was two 2x4x8′ – this definitely took a bit longer to figure out, including securing it to the door and then using wood filler to make it look like one piece.  Again, this was the toughest part, but we finally got it into a good spot with the wood filler.
  3. Next up was painting the door, white! After a few coats on each side, we were almost in business and then sprayed the windows on the outside of the door with the frosted glass look.
  4. We then drilled in our larger circular hooks at the top, added the wheels (which we had to switch with different ones that worked better), and then put together the pipe bar for placement!
  5. With some tweaking and DW-40 we got this door sliding easily and working great in the space! Once we had the door working, we added the handle while it was standing for more accurate placement.

DIY door 4 - thebeelifeThe frosted windows definitely help the bathroom space feel private, while from the outside it feels welcoming and open.  Since there are two windows in the room, we wanted the light to still be able to come through.  From the bathroom side of the door, you can see a slight difference in the additional side pieces – only because the door width with the wood pieces wasn’t an exact match – but from the outside it’s nearly perfect! 

Although this was a little extra work and challenged our problem solving skills, the end price was still WAY more affordable for the look and type of door we wanted to purchase – it was a savings of over half the price of the doors I wanted – plus we both love the way it came out!  And it’s completely custom to our space, don’t worry the full bathroom reveal is coming soon – in the meantime check out this $15 Floating Shelf, How to Install Vinyl Flooring and What We Wish We Knew before Tiling Our Shower.

bee (1)